ABB Ability 800xA Series, User Manual

Page: 88 / 122

If there are problem with deploy of the uploaded graphics the backup will also
contain the same warnings. Try to make all uploaded graphics correct before it is
backup.
Backup and Restore Section 5 Maintenance
88 3BSE037076-510 D
Select the
Summary
and Start Backup tab and click the
Start Backup
button to
make a backup of the Remote Access Client service.
When the Remote Access Client is backed up a full backup of the aspect directory
should be done.
Restore procedure
A Clean operation is not required before the upload.
If a provider system is upgraded to System Version 5.1 a new upload to the
subscriber system is done to correct the service IDs if uploaded from the provider.
Restore must be done both of the Aspect Directory data and the additional Remote
Access Client service proxy object data.
For a description about how to make a restore of the Aspect Directory data, refer to
System 800xA, Administration and Security (3BSE037410*) .
When a provider system is restored, the Aspect Directory and the file set
distribution services obtain new service identities.
If the service structure was uploaded from a provider to a subscriber, the system
status information will be down for these two services. To correct this problem,
make a new upload from the provider after a restore.
To restore the proxy objects for the Remote Access Client, follow the following
procedure.
1. Select the Maintenance Structure and select the Remote Access Client backup
object created when the backup was done.
2. Select the Backup Info aspect on the object.
Ensure that the Remote Access Client service has entered the
Service State
before starting the restore of it.