ABB Ability 800xA Series, User Manual

Page: 79 / 122

Section 4 Operation Transfer of Responsibility
3BSE037076-510 D 79
Point of Control Summary
dialog displayed in both the subscriber and provider
system displays that the subscriber system has responsibility instead of the
subscriber node.
If the responsible user in the provider system is not mapped to a subscriber user the
responsibility status will display
Remote User in the subscriber.
Transfer of Responsibility
The Point of Control functionality allows responsibility interaction from any object
that belongs to a section based on the following three protocols:
• Request Responsibility
• Grab Responsibility
• Release Responsibility
For more information, refer to Transfer of Responsibility section in System 800xA,
Operations (3BSE036904*) .
Request Responsibility
The responsibility of a section can be requested using the object context menu.
When a user requests the responsibility of a section, a tree structure including the
section with subsections is displayed.
The user can select the required sections and subsections to take the responsibility.
The currently responsible user can allow or deny the request for responsibility (see
Figure 51 ).
Execute following steps to request a Request Responsibility:
1. In the
Request Responsibility
dialog, select the responsibility type in
Responsibility
. For example, if the user has only the operation responsibility
configured, it is selected by default.
When the responsibility for a section is requested, the subsections are
automatically included.