ABB Ability 800xA Series, User Manual

Page: 67 / 122

Section 3 Configuration HTTPS Communication Protocol
3BSE037076-510 D 67
AOWebServerNode.
The default configuration is to use the
AOWebServerNode
host name for the communicating with the Provider Asset Optimization Server. It is
possible to use the IP address of
AOWebServerNode
for communication instead of
the host name.
To change the host name or IP address settings:
1. Go to the
Config View
of the
Asset Optimization Configuration
aspect and
select
IP
.
2. Enter the IP address of the
AOWebServerNode
.
Figure 42. Changing the IP address
3. Click
Apply
to save the settings.
This configuration change does not require an upload of objects.
HTTPS Communication Protocol
This section describes the steps to be performed when using
HTTPS
as the
Communication Protocol.
Secure Socket Layer (SSL) Certificates
The Asset Optimization data communication between the subscriber and provider
system is secured and encrypted using the SSL Certificate. The SSL certificate must
be installed and configured on the
AOWebServerNode
in the Provider system.
The following are the requirements for the SSL Certificate:
1. The Common Name (CN) must be the host name of the
AOWebServerNode
.
2. The recommended validity of the certificate is up to 4 years.