ABB Ability 800xA Series, User Manual

Page: 48 / 122

Running Upload Section 3 Configuration
48 3BSE037076-510 D
configuration by un-checking the aspect category in the list above. Unchecking
means the aspect category will not be uploaded.
All aspects with OPC properties, Log configurations, and Log templates will also be
uploaded unless “Ignore at upload” is checked on the aspect category.
The upload execution running in the Remote Access Client and will continue even if
the Plant Explorer is closed. To abort an on-going upload click the
Abort
button.
After an upload is complete, the result can be viewed either in the Upload messages
window or in the Upload History viewer.
To see a saved upload log, click the
Upload History
button. An upload history
viewer will open.
Select the upload log to view the desired log. The log will then be shown in the
lower window. The number of logs stored is configured in the Remote Access
Interrupting an upload can make the uploaded proxies inconsistent and thus not
working properly.
Figure 28. Upload History Viewer