ABB Ability 800xA Series, User Manual

Page: 43 / 122

Section 3 Configuration Upload Configuration
3BSE037076-510 D 43
the remote system will be uploaded below the Remote System/Inventory object in
the Control Structure, in addition to the selected structure.
Figure 24. Inventory Object
The “Include children” and “Follow References” configuration are shown in the
Upload Configuration tab in the columns References and Child Count after an
upload.
The order in which structures are uploaded is significant for the VBPG if any of the
graphics or references uploaded have a composite structure. Any structures
containing composite structures used for graphics must be uploaded before
structures using the aspects. Generally this means that the control structures, or part
of the control structure, should be uploaded before the functional structure. Use the
up/down button in the upload tab to change the upload order.
Figure 25. Upload Configuration after an Upload