ABB Ability 800xA Series, User Manual

Page: 35 / 122

Section 3 Configuration Remote Access Client
3BSE037076-510 D 35
Remote Access Client
Overview
Remote Access Client requires one license per provider to run without warnings.
The Remote Access Client service communicates with the Remote Access Server,
but resides on the subscriber system. There is always a one-to-one relation between
one Remote Access Client and one Remote Access Server, i.e. it only communicates
with one Remote Access Server.
The Remote Access Client service is automatically created when the Remote
System object is created.
Creation of a Remote Access Client
The Remote System object represents the provider system in the subscriber system.
It also holds the information about the upload configuration, and upload history
logs.
The Remote System object can only be created in the Control Structure:
1. To create a Remote System object, select Control Structure and select
New
object
from the context menu. Select the object type
Remote System
in the
New Object dialog
, see Figure 15 .