manualshive.com logo in svg

ABB Ability 800xA Series, Operation, Page: 47 / 332

Share
Download
ABB Ability 800xA Series Operation Download Page 47

Section 3  CCF Displays

Viewing Trend Data

3BUR002418-600 A

47

 

Viewing Trend Data

The source of the values that appear on Loop Detail Display trends are gathered 
from real-time CCF trend data. Other trend view objects, as described in 

System 

800xA Operations (3BSE036904*)

, can show real-time and historical trend data for 

several tags at once. 

The CCF trend data is scaled, based on the engineering unit range of the tag. When 
the CCF trend data is available, and the visibility is enabled, CCF trend data is 
displayed. Real-time trend values are not stored and only exist when the trend is 
displayed.

Working with Loop Detail Display Trend Data

You can change the visibility of trend traces, adjust the refresh rate of the X-axis, the 
range on the Y-axis and use a ruler to see the numerical values of points on the trend 
graph.

Changing the Trend Refresh Rate

To change trend refresh rate, select the 

Refresh

 button and enter a value in seconds 

(1 to 120). A total of 600 samples is shown on a full trend.

Changing the Trend Visibility

To change trace visibility, select the box next to a trace (see figure above). A 
checked box becomes a visible trace. Unchecked, a trace is not displayed (data 
continues to collect).

Changing the Y-Axis

To modify the Y-Axis, select either side of the trend area on the Y-axis markers. 
This displays the Modify Y-Axis dialog. To change the top number on the Y-axis, 

Summary of Contents for Ability 800xA Series













































































































































































































































































































































Reviews:

No comments