manualshive.com logo in svg

ABB Ability 800xA Series, Operation, Page: 301 / 332

Share
Download
ABB Ability 800xA Series Operation Download Page 301

Appendix A  Runtime Templates

DI810

3BUR002418-600 A

301

 

DI810

The DI810 templet is also used for the DI890 except as noted in the field entry 
descriptions. The DI890 also supports only 8 channels.

ACTIVE 01 through 16

If the channel is to be active enter a 

YES

. 

 

If the channel will not be used enter a 

NO

.

The default value is YES. 

AUTO DOWNLOAD

To automatically download the configuration to the I/O module enter a 

YES

. In the 

future, if the configuration is to be loaded locally enter a 

NO

. 

Default value is YES.

CLUSTER

Enter the I/O device cluster of the station where this module is located. The cluster 
connected directly to the FCI is number zero (0). The number in this field is 0 -7. 

Default value is 0.

FILTER

Enter the input filter time in msec. 

The valid values are:

 

2, 4, 8 and 16.

The default value is 2. 

Summary of Contents for Ability 800xA Series













































































































































































































































































































































Reviews:

No comments