Assembly Instructions / A101-H
2 Safety / 2.3 Occupational safety
© Copyright 2019 ABB. All rights reserved.
HZTL455311P0038_EN
Rev.A
December 2019
2.3
Occupational safety
General
WARNING
Injuries to persons
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures or non-compliance with safety and health standards.
u
When working on the turbocharger always wear safety footwear and pro-
tective clothing to protect against mechanical hazards.
u
Keep personal protective equipment in perfect condition.
u
Obey mandatory signs.
u
Observe the general rules for occupational safety and prevention of acci-
dents.
u
Only perform operations that are described in this document.
u
Only perform operations for which you have received instruction or train-
ing.
Wear safety footwear to protect against mechanical hazard and risk of fall-
ing.
Wear protective clothing.
WARNING
Risk of falling
When working on the turbocharger, there is a risk of falling.
u
Do not climb onto the turbocharger or onto attached parts and do not
use them as climbing aids.
u
Use suitable climbing aids and working platforms for work above body
height.
u
Only perform work on the turbocharger when you are in a physically and psychologically
stable condition.
u
Only work with suitable tools, equipment and appliances that function properly.
u
Keep the workplace clean; clear away any loose objects and obstacles on the floor.
u
Keep the floor, equipment, and turbocharger clean.
u
Have oil binding agents ready and provide or keep oil pans at hand.
Welding work in the vicinity of the turbocharger
u
When performing welding work in the vicinity of the turbocharger, always cover the filter
silencer to prevent the filter mat from being damaged.
Page
7
/
17
Summary of Contents for A101-H Series
Page 2: ......
