Safety instructions
Introduction
2
Safety instructions
2.1
Introduction
Read the following chapter before mounting and commissioning a system or device of the
EDS500 series.
2.2
Safety indication symbols
The following safety indication symbols are used in this documentation:
DANGER
Hazardous situation which, if not avoided, will result in death or serious injury of the
operating personnel. The provided information is necessary to know, if you configure a
EDS500 series device. The safety indication informs about a restriction etc.
WARNING
Hazardous situation which, if not avoided, could result in death or serious injury of
operating personnel.
CAUTION
Hazardous situation, which, if not avoided, could result in minor or moderate injury.
ADVICE
Important information not related to personal injury but that should be observed. This
symbol is used to indicate restrictions, prerequisites, and other information that is
important for configuration.
The following safety indication symbols are used on EDS500 series devices:
Symbol
Type
Level of danger
Warning
Hazardous situation, read documentation (data sheets and
operating instructions)
Advice
Protection class II equipment (IEC 61140):
•
double insulated and
•
with functional earthing.
Table 2:
Safety indication symbols on EDS500 series devices
1KGT151042
V000 1
7
