ABB 3HAC031670-001, Applications Manual

Page: 27 / 46

Note Action
Restart the controller. 6
Now the IRC5 controller is ready to be
contacted from a PROFINET controller.
Viewing the MAC address
After the configuration, it is possible to view the MAC address of the PROFINET
anybus device on FlexPendant in one of the following ways:
Using the Industrial Network view.
Note Action
The list of most common I/O signals is
displayed. In the ABB menu, tap Inputs and Out-
puts .
1
The list of available industrial networks is
displayed. Tap View and select Industrial Network . 2
Tap PROFINET_Anybus . 3
The MAC address of PROFINET anybus
device is displayed along with the other
details. Tap I/O Device Identification . 4
Using the I/O Devices view.
Note Action
The list of most common I/O signals is
displayed. In the ABB menu, tap Inputs and Out-
puts .
1
The list of available I/O devices is dis-
played. Tap View and select I/O Devices . 2
Tap the I/O device created to PROFINET
anybus device. 3
The MAC address of PROFINET anybus
device is displayed along with the other
details. Tap Actions and select I/O Device Identi-
fication .
4
Application manual - PROFINET Anybus Device 27
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
4 Configuring the anybus device
4.2 Configuring the anybus device
Continued