ABB 2TLA050007R0602, Product Manual

Page: 22 / 26

2TLC010088M0201
Rev.A 22
8 Technical data
Manufacturer
Address ABB Electrification Sweden AB
SE-721 61 Västerås
Sweden
Information
Standards IEC 60947-5-1, IEC 60947-5-3, ISO 14119, ISO 13849-
1, IEC 62061, UL 60947-5-1
Electrical characteristics
Supply Voltage 24 V DC (+/- 10%) SELV/PELV or Class 2
Power Consumption R+ (50 mA Max.)
S+ (500 mA Max.) (Solenoid)
Safety outputs, OSSD (12 & 22) Supply – 0.8 V DC, 200 mA max.
OSSD pulse characteristics Pulse length 300 us, pulse period 600 ms, 300 ms
between each channel’s pulse
Auxiliary Circuits (34 & 44) Supply – 0.8 V DC, 200 mA max
Safety inputs (11 & 12) 24 V DC, x mA (max. allowed test pulse length: 300
us)
Time delay, safety inputs -> safety
outputs Less than 20 ms
Rated Insulation Voltage 500 V AC
Rated Impulse withstand 1000 V AC
General
Holding Force F
Zh
(ISO14119) MKey9RF: 1500 N
MKey8RF: 2300 N
MKey10RF: 2300 N
Coding level (ISO14119) Type 4 High
Actuator insertion for locking 5 mm
Sao / Sar (RFID) 15 mm / 25 mm
Operating Frequency 1 Hz
Actuator entry minimum radius 175 mm
Body Material MKey9RF Polyester
MKey8RF, MKey10RF Die cast – Painted red
Mkey8ZRF
Stainless Steel 316
Head Material Stainless Steel 316
Mechanical Actuator Material Stainless Steel 316
Enclosure Protection IP67 MKey9RF, MKey8RF
IP65 MKey10RF, MKey10RFER
IP69K MKey8ZRF version only
Terminal connections Conductor cross section area:
Conductor: 0.20 – 1 mm
2
(AWG 16-24)
Conductor with crimp sleeve: 0.20 – 1 mm
2
(AWG
16-24)
Wire stripping length: 6 mm