Publication No. HRMCP9 Rev. B
Introduction 17
•
Power supply Usage
- +5 V and +3.3 V for board supply
- +12 V for PMC and Hot Swap controller supply
- -12 V optional, if needed on PMC
NOTE
IMPORTANT:
The CR9 boards shows a height violation which is to be checked if a PMC mezzanine module
needs to be installed into the central area of the board (PMC1).
•
Approval
- Designed to meet standard UL1950, CE class A, FCC-A
•
H110 Backplanes
- The CT9 can be optionally ordered without connector J7004 (=CPCI J4)
assembled for backplanes providing H110 functionality. As a consequence
some rear I/O will not be available. Please check in Chapter
for more details.
Styles available:
Table 1-1 Styles Available
CR9 (non-ROHS)
C
D
I
H
R
N
CR9 (RoHS)
1
2
3
4
6
8
Front panel
x
x
x
x
x
Extended temp.
x
x
x
x
Parts soldered
x
x
Middle stiffener bar
x
x
Wedge locks
x
Conformal coating
x
x
x
x
Conduction cooling
x
Onboard battery
x
x
x
x
Onboard speaker
x
x
x
x
x
CT9 and CP9 can only be ordered in C-, 1- or I-, 3-style.
