Solares™ Smart Spa Bathing System Operating Manual
CD0036
- 32 -
1121
Maintenance
To reach the Maintenance Menu, you will need
to be logged in as either admin or maint
(maintenance).
To reach the maintenance menu, push the
maintenance button on the home page.
Maintenance screen
Calibrating Scale
Calibrate scale per WI0114-Solares Scale
Calibration. (Copy located on included flash
drive.)
Calibrating Chair Weight
For the tub to provide an accurate resident
weight, it will need to know the weight of the
transfer chair. In calibrating the chair’s
weight, it is important to ensure that the chair
is equipped with all the same items that it will
have on it during a typical bath. I.e. Belts, gel
pad, handles, etc.
1.
With the door all the way open and the
carrier disengaged from the tub, lightly
tap
“Zero Scale”.
2.
Transfer the chair into the tub and
remove the base.
3.
Push “Calibrate Chair Weight” to bring up
the chair config menu.
4.
Ensure that all accessories currently on
the chair are selected (green) and all
items not currently equipped are not
selected. (grey)
5.
Lightly press
“OK” to finish calibrating
chair weight.
6.
Transfer chair out of tub and disengage
carrier.
7.
Transfer chair back into tub and verify
weight reads 0.
Note: stored chair weight displays the
current chair weight in the system. Default
= 28.5
-The equipped accessories selected on the
weighing page will be set to those selected
in the chair config dialog at completion of
chair weight calibration.
The table below shows the weights of various
carrier accessories for your reference. These
are the wights that will be offset from the
chair when the calibration configuration
doesn’t match the currently set configuration.
Item
Weight
Arch Support Pad
1lb
Gel Pad
7.8lbs
Belts
0.4lbs (0.2lbs each)
Handles
2.3lbs (1.2lbs each)
For example. If the chair was zeroed
without the gel pad and the operator
selects the gel pad as being used on the
weighing screen then 7.8 lbs. will be
subtracted from the weight to account for
it.
Maintenance Buttons/ Controls
Unrestricted Fill
–
Disables temperature
control and opens tub fill. Used for
Summary of Contents for Solares Smart Spa
Page 30: ......
