manualshive.com logo in svg

AB Sciex QTRAP 4500 LC/MS/MS system, System User'S Manual, Page: 20 / 138

Share
Download
AB Sciex QTRAP 4500 LC/MS/MS system System User'S Manual Download Page 20

Hazards Symbols

4500 Series of Instruments

System User Guide

20 of 138

RUO-IDV-05-0264-A

Documentation

The following symbols and conventions are used throughout the guide.

This system is for research use only. It is not intended 

for use in diagnostic procedures.

Caution, refer to accompanying documents. 
Minimum of six persons required to safely lift this 

equipment.

Consult operating instructions.

Follow operating instructions (mandatory).

Alternating Current

High voltage. Electrical Shock Hazard

On (Mains supply)

Off (Mains supply)

Protective Earth (ground)

V

Volts (voltage)

A

Amperes (current)

DANGER! Danger signifies an action which leads to severe injury or death.

Table 2-6 Labels on the Mass Spectrometer (Continued)

External Labels

Definition

FOR RESEARCH USE ONLY. NOT FOR 

USE IN DIAGNOSTIC PROCEDURES.

Summary of Contents for QTRAP 4500 LC/MS/MS system











































































































































Reviews:

No comments