33
System Information
Here you can view the system information and assign the system name and location to
make this switch more easily identified on your network.
System Name:
Assign the name of the switch. The maximum length is 64 bytes.
System Description:
A read-only field displaying the description of the switch.
System Location:
Assign the switch physical location. The maximum length is 64
bytes.
System Contact:
Enter the name of contact person or department.
Firmware Version:
Displays the switch’s firmware version.
Kernel Version:
Displays the kernel software version.
MAC Address:
Displays the unique hardware address assigned by manufacturer
(default).
Click Apply to have the configuration take effect.
[NOTE]
Don’t set “0” for the first segment of the subnet mask and default gateway
(000.xxx.xxx.xxx).
Refresh the web screen if the web could not be displayed while you change
the setting.
System Information interface
Summary of Contents for LNX-1002NM-67-T
