Aastra X Series, Installation And Implementation Manual

Page: 217 / 217

Page 13-217 10/2008 AMT/PTD/TR/0020/2/7/EN
For the other sites the programming is as follows:
The field "MASTER SITE FAR FROM" is used to compensate the DECT clock transmission time
from one site to another. Adjustment is made in 100 m steps on the slave PBXs, with the formula
described in the section "Synchronisation with UCT-L/UCT-S" applied. The minimum value for
the "adjustment" distance is "<100 meters", and the maximum value "> 2000 meters".
13.6 Multi-site configuration with CSI
In a multi-site configuration with CSI there is no particular MMC programming to be carried out.
Configuration is manual (configuration of switches on BCSI, CSI and RMH; see section 7.5.2).
*** END OF DOCUMENT ***
DECT PARAMETERS
PARI VALUE 0 999999999.
RANDOM VAL RECORDED 86........
RS VAL RECORDED 66........
DIR. BEGINNING ASSIGNED TO PLL 999.
SEARCH MOBILES NOT REGISTERED
IN THE LOCAL SITE NO
OR IN ANOTHER SITE ........
OR IN THE LOCAL CENTER NO
OR IN ANOTHER CENTER ........
OR IN THE LIST BROADCAST A
CLOCK SYNCHRON. SLAVE
MASTER SITE FAR FROM < 100 METERS
CURRENT STATE RECEIVER