Aastra X Series, Installation And Implementation Manual

Page: 200 / 217

AMT/PTD/TR/0020/2/7/EN 10/2008 Page 12-200
12.2.2 DECT parameters
This screen is accessible via
NETWORK AND LINKS / Equipment / DECT management
.
Note:
For a multisite network, additional parameters appear, making it possible to define the
list of sites on which the mobile terminals will be registered, see Chapitre 11.
• PARI VALUE: 9 digits maximum (the PARI number can be found on the PBX approval label).
Mobiles recording
• RANDOM VAL RECORDED and RS VAL RECORDED: maximum 9 digits.
2 random values (must not be the same) registered in the mobile by the PBX when the mobile
was registered on the DECT network. From this point onwards, the PBX regularly checks the
values registered in the mobiles (the values are calculated from these two parameters) in
order to authorise or refuse use of the DECT network.
Enter a value lower than 4294967295 (FFFF FFFFh). The value of the random number has
no significance. However, in a multi-site configuration the number must be identical in all
locations where the mobiles are to be registered.
• PASSWORD
Password used while registering a cordless handset.
• RECORDING CODE
Recording code length. The recording code consists of the last digits of the directory number,
possibly completed with the first digits of the record password.