TA7104i Hardware Installation
© 2014 Aastra Sweden | 154_1531 ANF 901| A | 2014-04-15
3
1
About this Manual
The TA7104i are multi-function devices combining VoIP Analog Adapter, Gateway and QoS
control in a secure and powerful platform.
This platform, featuring FXS interfaces, provides an ideal solution for enterprise voice
applications or for connecting to a service provider's broadband access.
The TA7104i also allows Enterprises, Service Providers, and System Integrators to deploy
secure systems and generate additional revenue streams.
The TA7104i are available in the following models:
1.1
Document Objectives
The
TA7104i Hardware Installation Guide
provides technical information on how to physically
install the TA7017i. It also describes the cabling required for the TA/104i device.
The information included in this guide consists of:
•
Hardware descriptions of the TA7104i device
•
Hardware installation instructions
•
Installation scenarios examples
•
LED indications
•
Cabling and pin-out data
Note!
There are many flavours of the TA7104i. Because of this, some of the
information provided may not apply to your particular TA7104i device model.
Please refer to the
Dgw v2.0 Software Configuration Guide
for software configuration
information.
Use the
TA7104i Hardware Installation Guide
in conjunction with the appropriate publications
listed in
“Related Documentation.
1.2
Intended Audience
This guide is intended for the following audiences:
•
Third Party Software Copyright Information
This document lists the third-party software
modules used in the TA7104i along with any copyright and license information. Be sure to
read any readme files, technical bulletins, or additional release notes for important
information.
Technical staff who are familiar with electronic circuitry, networking theory and have experience
as an electronic technician.
