Aastra openphone 28, User Manual

Page: 12 / 104

The Features of Your Telephone
10
Installation
Scope of Delivery
Please check the contents upon receiving your OpenPhone 28:
• Handset OpenPhone 28 with belt clip and MEM card
• Replacement battery
• Charging station
• AC Adapter (no. 4999045014, no. 4999051605 for the UK) 230 V with connection
cable
If Your Handset has not been Assembled
If your handset has been delivered unassembled, you must:
• insert the MEM card (see page 11),
• insert the battery (see page 12) and
• if necessary, remove the protective film from the display.
• Your system administrator must subscribe the handset to your communication
system.
Your OpenPhone 28 is then ready to operate.
Now install the charging station (see page 12).
If your Handset has been Completely Assembled
If your handset has been delivered completely assembled and it is subscribed to your
communications system, then you only need to install the charging station (see
page 12).
MEM Card
It is only possible to make a telephone call with your handset when the MEM card has
been inserted (condition upon delivery). It saves important data of your handset, such
as your personal telephone book. If you should change your handset at some point,
you will be able to telephone immediately using this MEM card.