Aastra OpenCom 100 series, Mounting And Commissioning User Manual

Page: 26 / 256

Factory Settings on Delivery
24
*) These settings are shown only in the Expert view.
The following important settings are active without further configuration:
• External authorisation: International numbers can be dialled from all configured
terminals. External lines must be seized by entering a preset code.
• Call forwarding to internal and external numbers can be activated. Call forwarding
after delay is performed after 20 seconds. Door calls and MSN groups can be for-
warded. Call diversions for other users and call diversions by other users are deac-
tivated.
• The telephone lock can be activated. The terminal PIN is “0000”.
• The white list, black list and call filter are not preconfigured and therefore not
active. If these lists are configured, they can be activated for user groups. A special
list of emergency phone numbers is preset and activated.
• The door opener can be opened from all terminals. Door calls can be forwarded.
• Every standard user can change the configuration of OpenCom 100.
• Every standard user can create a personal telephone book and edit entries in the
central telephone book.
• Every standard user can read out the charges.
• Applications requiring a licence (e.g. OpenCount 100) can be used after being
activated.
• RAS access is not allowed.
Internet Functions
• RAS access (with or without callback) can be set up for every OpenCom 100 user.
RAS access requires the activation of the RAS authorisation.
• Multiple e-mail account queries can be set up for every user. Every user with a
system terminal can be automatically informed about incoming e-mails with this
function. Subject and sender of the e-mail will be displayed. The e-mail remains on
the e-mail-server where it can be queried with a standard e-mail programme.
• Users can disconnect existing Internet connections (via the Web console of
OpenCom 100 and from a system terminal, if this function has been configured on
this terminal).