System Functions and Features as of I7.9
96
Routing elements
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
4. 5. 4
Other Functions and Settings of the CDE
Name
Name
is used to assign a name to each call distribution element. The name is used
for identification purposes.
•
With incoming calls it is displayed on the system terminal.
•
With outgoing calls via KT lines it is provided as CNIP.
The name cannot be used for dialling by name.
Displaying DDI
With incoming calls the direct dialling number can also be displayed instead of the
name of the call distribution (
Force showing DDI number
=
Yes
). This is needed for
CTI applications in particular.
Activating / Deactivating Incoming Call Logging (ICL)
Incoming call logging can be activated or deactivated for each call distribution ele-
ment (see
"Call logging for incoming calls (ICL)", page 259
).
Specifying the Company Configuration
The
Company
setting specifies whether or not the call distribution element is to be
used in a two-company configuration (see
"Two-company system", page 118
Courtesy (announcement prior to answering)
A Courtesy group can be allocated to each call distribution element; likewise Cour-
tesy can be deactivated for each element (see
"Courtesy Service (announcement
prior to answering)", page 450
KT Cost Centre
Call charges for calls via the KT lines of a call distribution element are logged at the
cost centre entered under
KT cost centre
(see also
"Outgoing Calls via a KT Line",
).
Other Subjects Relating to Call Distribution:
Trunk group, Direct dialling plan, User group, Key telephones, User con-
figuration, Internal traffic, Incoming traffic, Outgoing traffic, Traffic in the
PISN, Switch groups, Numbering plan.
