Aastra IntelliGate A150 System Manual Download Page 467

Page: 467 / 524

System Functions and Features as of I7.9

Features

467

020

0/3.

– I7.

– 1

.2009

8. 7. 9

Home alone

If calls to a user group can only be answered by one user, that user can activate the

Home Alone

feature on the user group.

If the user is then making a call, all other internal or external callers to the user
group will obtain the congestion tone.

If the user in the user group is assigned several terminals, the parameter

Busy if busy

must be configured to

Yes

for that user.

Detailed Description

Tab. 314 Home alone

•

A UG with activated

Home Alone

is busy if at least one of the UG’s users is in an

outside call or an internal call.

•

If a user is in several line groups with “Home Alone” activated and if he is in a call,
callers to one of the UGs will obtain “busy”.

Prefix Dialling Procedures

Tab. 315 User group: Procedures

System configuration

Tab. 316 Home alone System configuration

Operating sequence / signalling on the terminal

Scope

• The user obtains an acknowledgement tone in each case when activat-

ing/clearing Home Alone.

• If the function is configured on a key with LED display, the status will be

displayed. The LED lights up when the feature is activated.

*/# procedure

Activate Home Alone

*49 UG No.

Clear Home Alone

#49 UG No.

Parameter

Parameter value

Remarks

Home alone

Yes

CM_2_1_5

Busy if busy

Yes

CM_3_2_5

Summary of Contents for IntelliGate A150













































































































































































































































































































































































































































































































































Search results

Summary of Contents for IntelliGate A150

Reviews:

Brands by name

Popular brands

Aastra IntelliGate A150, System Manual

Search results

Summary of Contents for IntelliGate A150

Reviews:

Brands by name

Popular brands