System Functions and Features as of I7.9
Features
459
sy
d-
020
0/3.
0
– I7.
9
– 1
1
.2009
8. 7. 5
Emergency numbers
The system is equipped with emergency numbers, which can be used by all inter-
nal users. Emergency calls are routed to a destination B preconfigured in the sys-
tem configuration.
Detailed Description
Tab. 303 Emergency number
A total of 10 emergency numbers can be created in the numbering plan. The emer-
gency numbers are used to quickly dial an emergency number destination.
A total of 50 emergency number destinations with three destination numbers each
can be configured. A separate emergency number destination can also be assigned
to each terminal. This destination takes priority over the destination assigned in the
system configuration.
A destination number can be stored for each of the three switch positions of switch
groups 1 to 20. When an emergency number is dialled, one of the three destination
numbers is dialled.
Note:
If an external destination with exchange access prefix code is specified, it
is important to ensure that a route is assigned to each user.
System configuration
Tab. 304 Emergency number: System configuration
Note:
The emergency number can also be the destination of a hotline and can
be configured differently for each of the three possible switch positions.
Interface
Scope
B
Possible interfaces:
internal, external, PISN
Parameter
Parameter value
Remarks
Emergency number
<Call number>
Numbering Plan
Emergency number destination
<1 to 50>
Destinations
Name
Switch group
Destination for switch position 1..3
<Name of the emergency number destina-
tion>
<1 to 20>
<Destination numbers>
System configuration
Emergency number destination
<1 to 50>
Terminal configuration
