Aastra DT412 User Manual Download

Page: 35 / 166

MD Evolution – Cordless DT412 / DT422 / DT432

Incoming Calls

Mute ringing signal

If the phone rings at an inconvenient moment:

Press the Mute key on the right side of the phone to suppress
the ringing.

All alert signals, including the vibrator, will silence for this specific

call. See section “

DT4X2 General Description

” on page 20 for the

location of the Mute key.

Press to answer the call.

Handsfree

Press the middle Soft key to answer the call in handsfree
speaking mode.

You are connected to the caller via the loudspeaker and

microphone.

Note:

Which key to press depends on the answering

method used, to change the answering method see section

“

Answering Method

” on page 36.

End the call

Press.

The display shows the duration of the call.

Note:

When a headset is connected to the phone, the

button on the headset can be used to end the call.

Summary of Contents for DT412






































































































































































Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands

Aastra DT412, User Manual

Search results

Summary of Contents for DT412

Reviews:

Related manuals for DT412

Brands by name

Popular brands