Operational, Basic Parameters
41-001390-00 Rev 02 – 12.2011
A-4
Operational, Basic Parameters
The following sections provide the configuration parameters you can configure on the BluStar 8000i. Each parameter table
includes the name of the parameter, a description, the format, default value, range, and example. The table also provides
the method for which the parameters can be configured (e.g. aastra.cfg, <model>.cfg, <mac>.cfg, or <user>.cfg).
Network
Settings
Parameter
–
dhcp
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Enables or disables DHCP. Enabling DHCP populates the required network
information. The DHCP server serves the network information that the BluStar
8000i requires. If the BluStar 8000i is unable to get any required information,
then you must enter it manually. DHCP populates the following network infor-
mation:
IP Address, Subnet Mask, Gateway, Domain Name Servers (DNS), HTTP HTTPS,
TFTP, and FTP servers, and Timer Servers.
Format
Integer
Default Value
1 (enabled)
Range
0-1
0 (disabled)
1 (enabled)
Example
dhcp: 1
Parameter
–
ip
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
This parameter assigns a static IP address to the BluStar 8000i.
For DHCP to automatically populate this parameter, your DHCP server must
support Option 66.
Format
IP address
Default Value
0.0.0.0
Range
NA
Example
ip: 192.168.0.25
