Setting Parameters in Configuration Files
A-3
41-001390-00 Rev 02 – 12.2011
Setting Parameters in Configuration Files
You can set specific configuration parameters in the configuration files for configuring a BluStar 8000i. The
aastra.cfg
,
<model>.cfg
,
<mac>.cfg
, and
<user>.cfg
files are stored on the server.
The
aastra.cfg
file contains configuration information about all BluStar and/or all 9000i and 6700i series IP SIP phone
devices.
The
<model>.cfg
file contains model specific information.
The
<mac>.cfg
file stores configuration settings specific to the BluStar with that MAC address, and has the parameter
“
update url
” that downloads software onto the BluStar 8000i.
The
<user>.cfg
file contains the user’s settings, including call logs and favorites. You will see settings and parameters fill
up the <user>.cfg file as the user uses their BluStar 8000i.
Reference
For information about configuration file precedence, see
Notes:
•
Configuration changes made to the <mac>.cfg file override the configuration settings in the <model>.cfg and aas-
tra.cfg files only. Settings in the <model>.cfg file override settings in the aastra.cfg file only.
•
Settings in the <user>.cfg file cannot be overridden by settings in the <mac>.cfg, aastra.cfg, or <model>.cfg files.
•
The majority of configuration parameters that you enter in the configuration files are
NOT
case sensitive, however
language values (e.g. French)
ARE
case sensitive.
