BluStar 8000i Settings
41-001390-00 Rev 02 – 12.2011
4-28
Configuring BL F/BLF List for Directed Call Pickup
Use the following procedure to configure BLF/BLF List for directed call pickup:
Diversion Display
When an outgoing call from the BluStar 8000i is being diverted to another destination (i.e., via call forward), the BluStar
8000i displays the caller ID (display name and username) of the new destination and the reason for the call diversion. Sim-
ilarly, at the new destination, the caller ID of the original call destination displays.
Call Diversion Example:
Configuration Files
For the specific parameter(s) you can set in the configuration files, see Appendix A, the section,
.
1.
Tim calls Mark at x400.
2.
Mark’s BluStar 8000i is busy.
3.
Mark’s BluStar 8000i diverts the incoming call to another destination (Mark has immediate call forwarding set to Roger @ ext. 464).
4.
Tim’s BluStar 8000i displays the name and extension of where the call is being diverted to and the reason for diverting the call.
5.
Roger’s BluStar 8000i accepts the call and displays the name (or number)of the BluStar 8000i of the incoming call (Tim) and the
name (or number) of the original destination (Mark).
