Operational, Basic Parameters
41-001390-00 Rev 02 – 12.2011
A-42
Directed Call Pickup
Parameter
–
directed call pickup
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Enables or disables the use of "directed call pickup" feature.
Format
Boolean
Default Value
0 (disabled)
Range
0-1
0 (disabled)
1 (enabled)
Example
directed call pickup: 1
Parameter
–
directed call pickup prefix
Configuration Files
–
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Allows you to enter a specific prefix string (depending on what is available
on your server), that the BluStar 8000i automatically dials when dialing the
Directed Call Pickup number.
For example, for Broadsoft servers, you can enter a value of
*97
for the
“
directed call pickup prefix
”. When the phone performs the Directed Call
Pickup after pressing a BLF or BLF/List softkey, the phone prepends the *97
value to the designated extension of the BLF or BLF/List softkey when dial-
ing out.
Notes
:
• The default method for the phone to use is Directed Call Pickup over BLF if
the server provides applicable information. If the Directed Call Pickup over
BLF information is missing in the messages to the server, the Directed Call
Pickup by Prefix method is used if a value for the prefix code exists in the
configuration.
• You can define only one prefix at a time for the entire BLF/List.
• The phone that picks up displays the prefix code + the extension number
(for example, *981234 where prefix key = *97, extension = 1234).
• Symbol characters are allowed (for example “*”).
Format
Integer
Default Value
NA
Range
NA
Example
directed call pickup prefix: *97
