manualshive.com logo in svg

Aastra Ascotel IntelliGate 2025, System Manual, Page: 74 / 111

Share
Download
Aastra Ascotel IntelliGate 2025 System Manual Download Page 74

Interfaces and Terminals as of I7.8

74

Terminals

sy

d-

023

9/2.

4 

– I7.

8

 – 0

7

.2009

3. 5

Various terminals

3. 5. 1

SIP terminals

Besides IP system terminals Ascotel® IntelliGate® also supports SIP-based IP termi-
nals (SIP terminals). With the integrated SIP protocol SIP terminals (softphones and 
hardphones) can be connected to the communication system via the Ethernet in-
terface and registered as internal users.

Besides the basic functionality the SIP protocol also supports features such as "Call 
transfer", "Conference calls" and "CLIP/CLIR". */# procedures can also be used to op-
erate various functions. The table in the "Features Overview" Chapter in the "SIP in 
Ascotel® IntelliGate®" System Manual provides an overview of the functions that 
can be carried out using SIP terminals.

SIP terminals on Ascotel® IntelliGate® can be split into two groups of terminals:

•

SIP terminals of the Aastra 6700i family
This group comprises the terminals Aastra 6730i, Aastra 6731i, Aastra 6751i, 
Aastra 6753i, Aastra 6755i and Aastra 6757i. These terminals have strong links 
with Ascotel® IntelliGate® and can be configured using AIMS. Compared with 
other SIP terminals, a number of Ascotel® IntelliGate® features are user friendly 
and menu-prompted. What’s more, convenient, automated configuration of 
these terminals is made possible with the aid of a configuration server inte-
grated in Ascotel® IntelliGate®.

•

Other SIP terminals

They include SIP terminals by Aastra or other manufacturers which do not have 
strong links with Ascotel® IntelliGate®. They include:

– Softphones running as an application on a PC.

– Line-connected hardphones.

– WLAN and DECT terminals connected with the IP network via an access point.

See also:

More detailed information on the integration of SIP terminals of the 
Aastra 6700i family in Ascotel® IntelliGate® can be found in the "SIP in 
Ascotel® IntelliGate®" System Manual. Other documents on these termi-
nals including brochures, User’s Guides, installation instructions, etc., can 
be found at 

http://www.aastra.com

 and on your dealer’s homepage.

Summary of Contents for Ascotel IntelliGate 2025
















































































































Reviews:

No comments