Aastra Ascotel IntelliGate 2025 System Manual Download Page 34

Page: 34 / 111

Interfaces and Terminals as of I7.8

System Interfaces

023

9/2.

– I7.

– 0

.2009

2. 3

Special Interfaces

The system supports a range of special interfaces.

2. 3. 1

Ethernet interfaces

The system provides two types of Ethernet interfaces:

•

Ethernet interface on the basic system for

– data exchange with AIMS

– signalling and transmitting voice data (VoIP) in an Ascotel® IntelliGate® Net

(AIN)

– linking up the Open Interfaces Platform (OIP)

– the connection of a CTI, alarm, ATAS or messaging server, etc.

– the connection of IP system terminals

– the connection of SIP terminals (Soft or Hardphones)

– Connection to one or more SIP service providers.

– Coupling two A150/300 systems into a single isyLink system

– Networking Ascotel® IntelliGate® systems via SIP.

•

Ethernet interface on the expansion card

– AIP-6400 for networking Ascotel® systems with QSIG protocol

– AIP-6500 for implementing an Ascotel® IntelliGate® Net and connecting IP

system terminals and SIP terminals.

Summary of Contents for Ascotel IntelliGate 2025
















































































































Search results

Summary of Contents for Ascotel IntelliGate 2025

Reviews:

Aastra Ascotel IntelliGate 2025, System Manual, Page: 34 / 111

Search results

Summary of Contents for Ascotel IntelliGate 2025

Reviews: