manualshive.com logo in svg

Aastra 9143i Series, User Manual, Page: 14 / 212

Share
Download
Aastra 9143i Series User Manual Download Page 14

6

Model 9143i IP Phone User Guide

 

Getting Started

Idle Screen 2

The second display line displays the following temporary messages if the event occurs:

•

No  Service

•

DHCP Failed

•

Restarting......

•

New IP Obtained

•

Network Disconnected/Connected

The second line can also display the following status messages, listed in order of display 

priority:

•

Call forward status

•

DND On (Do Not Disturb)

•

Number of missed calls

When more than one status message displays, the 

2

 i

s shown after the message to indicate you 

can use the 

2

 and 

5

 navigation keys to scroll through the remaining messages.

Incomplete Configuration

If your phone displays an "

Incomplete Config

" message without any extension or user name at 

the end of the start up sequence instead of an Idle state screen, this inidicates the phone 

configuration that was downloaded from the configuration server is not complete or correct. 

Contact your System Administrator for assistance.

Note: 

Since the "Network Disconnected/Connected" display on two lines, the date 

and time does not show if this event displays.

John Burns

CFWD All

Jun 8    2:55pm

1

Network Connected

2

Summary of Contents for 9143i Series





















































































































































































































Reviews:

No comments