Aastra 7446ip User Manual Download

Page: 84 / 96

6/1553-DBC 446 01 Uen G 2012-02-22

ROWSER

14.9 Help

You can easily get information on which software version is installed on
your phone, the phone IP address, and the phone web address.

To find this information, do the following:

Tap ,

My Settings

and select

Help.

About Aastra 7446ip

is displayed

Tap

Select.

Software version is displayed.

Select

Phone IP Address

and press

Select

to see the IP address.

Select

Phone Web Address

and press

Select

to see the web

address.

Note:

Whether or not the

Phone Web Address

option is available in the

Help

menu, depends on how the phone is configured. Contact

the system administrator for more information.

Web Browser

The Aastra 7446ip phone has a built-in web browser which can be
accessed from the menu bar at the top of the display window.

15.1

Opening the Web Browser

To open the web browser, do the following:

Tap

in the menu bar to open the

Internet

page, see below.

Summary of Contents for 7446ip

































































































Search results

Summary of Contents for 7446ip

Reviews:

Related manuals for 7446ip

Brands by name

Popular brands

Aastra 7446ip, User Manual

Search results

Summary of Contents for 7446ip

Reviews:

Related manuals for 7446ip

Brands by name

Popular brands