Aastra 6865i User Manual Download

Page: 77 / 174

Line Keys and Programmable Keys

41-001523-00 REV00 – 04.2014

Speeddial/Xfer

The

Speeddial

key allows a number to be dialed quickly by pressing one key configured for speed dialing. The

Transfer

key allows a call to be transferred to other recipients blindly or consultatively. The

Speeddial/Xfer

key combines the

Speed dial

and

Transfer

key's functionality together allowing the user to transfer calls or use speed dial with one key.

Speeddial/Xfer Key Requirements and Functionality

The

Speed Dial/Xfer

key has the following capabilities:

•

Speed Dial/Xfer and Speed Dial: When the phone is in the idle state, pressing the

Speed Dial/Xfer

key causes the

phone to go offhook and dial the predefined extension.

•

Speed Dial/Xfer and Blind Transfer: When the phone is connected to a call, pressing the

Speed Dial/Xfer

key blind

transfers the call to the predefined target.

If transferring a call fails, a message

Transfer Failed

displays, and you can reconnect the call (get the call back) by press-

ing the line key again.

•

Speed Dial/Xfer and Call Forward: When the phone is in the ringing state, pressing the

Speed Dial/Xfer

key forwards

the call to the predefined extension.

Note:

It is recommended that you enable the Switch UI Focus to Ringing Line parameter when using the Speeddial/Xfer fea-
ture. For more information about this parameter, see

“Switch UI Focus to Ringing Line”

page 142

Summary of Contents for 6865i















































































































































































Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands

Aastra 6865i, User Manual

Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands