Aastra 6865i User Manual Download

Page: 103 / 174

41-001523-00 REV00 – 04.2014

Making Calls

This section describes ways to make calls on your 6865i phone, using your handset, speakerphone or headset.

Dialing a Number

First, take the phone off-hook by:

•

Lifting the handset

•

Pressing

•

Pressing a line/call appearance key.

At the dial tone, enter the number you wish to call.

If you are unable to make calls within certain area codes, check with your System Administrator for any toll restrictions
placed on your extension that may restrict your access to long distance area codes or dialing prefixes.

When your party picks up, a timer appears on your display that records the length of your call.

If the

Live Dialpad

option is on, as soon as you press the first digit on the keypad the phone automatically selects the next

available line, go off-hook and dial as digits are pressed.

Note:

After dialing the number, the phone has a short delay before sending the call. To send the call immediately, you can press
the

Dial

key immediately after dialing the number. The phone sends the call without delay.

L1

Dial

Summary of Contents for 6865i















































































































































































Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands

Aastra 6865i, User Manual

Search results

Summary of Contents for 6865i

Reviews:

Related manuals for 6865i

Brands by name

Popular brands