Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV00 – 07.2011
90
Sprecode Key
You can set a key to automatically activate specific services offered by the server by setting a key to "
sprecode
". For exam-
ple, if the sprecode value of *82 is configured, then by pressing the key, *82 automatically activates a service provided by
the server. The value you enter for this field is dependent on the services provided by the server. Contact your System
Administrator for information about available services.
Configuring a Sprecode Key
Use the following procedure to configure a Sprecode key on the 6735i IP Phone. The procedure shows the softkey screen
as an example.
Aastra Web UI
1.
Click on
Operation->Softkeys and XML
.
or
Click on
Operation->Programmable Keys
.
or
Click on
Operation->Expansion Module <N>.
Softkeys
2.
Select from
"Key 1"
through "
Key 20
".
3.
In the "
Type
" field, select "
Sprecode
".
4.
In the "
Label
" field, enter a label to display on the IP phone for this key.
5.
In the "
Value
" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
6.
In the state fields, check (enable) or uncheck (disable) the "
Connected
" state for this softkey.
Programmable Keys
7.
Select from "
Key 1
" through "
Key 6
".
8.
In the "
Type
" field, select
Sprecode
.
9.
In the "
Value
" field, enter the appropriate value for accessing specific services from the server.
Note:
For values to enter in this field, contact your System Administrator.
Expansion Module Keys
10.
Select from “
Key 1
” through “
Key 36
” (M670i).
or
Select from “
Key 1
” through “
Key 60
” (M675i).
11.
In the "
Type
" field, select
Sprecode
.
