Configuration Methods
41-001343-02 REV05 – 07.2014
2-12
Basic Settings
The
Basic Settings
section provides the following options:
Heading
Description
Preferences
Allows you to set the following General specifications on the IP phone.
•
Local Dial Plan (Admin Only)
•
Send Dial Plan Terminator (Admin Only)
•
Digit Timeout (Admin Only)
•
Park Call
•
Pick Up Parked Call
•
Display DTMF Digits
•
Play Call Waiting Tone
•
Stuttered Dial Tone
•
XML Beep Support
•
Status Scroll Delay (seconds)
•
Switch UI Focus to Ringing Line
•
Call Hold Reminder During Active Calls
•
Call Hold Reminder
•
Call Waiting Tone Period
•
Preferred Line
•
Preferred Line Timeout (seconds)
•
Goodbye Key Cancels Incoming Call
•
Message Waiting Indicator Line
•
DND Key Mode
•
Call Forward Key Mode
This section also allows you to set:
•
Outgoing Intercom Settings (Admin Only; Administrator can enable these for a User if required)
•
Incoming Intercom Settings
•
Group Paging RTP Settings
•
Key Mapping (Admin Only)
•
Ring Tones
•
Priority Alert Settings (Admin Only)
•
Directed Call Pickup Settings (Admin Only)
•
Auto Call Distribution Settings (Admin Only)
•
Time and Date Settings
•
Language Settings (Only the Admin can specify the language pack names to load to the phone). Both the Admin
and User can select the language type to display for the Web UI.
Account Configuration
Allows you to configure DND (Do Not Disturb) and/or Call Forwarding by specific account or by all accounts. Also
allows you to enable/disable specific states for each account, specify different phone numbers for call forwarding,
and specify number of rings for a “No Answer” state.
