Aastra 6730I, Administrator'S Manual

Page: 734 / 888

Operational, Basic, and Advanced Parameters
A-128
41-001343-02 REV05 – 07.2014
DND Key Mode Settings
The following is an example of configuring the mode for DND in the configuration files:
dnd key mode: 2
softkey1 type: dnd
softkey1 states: idle connected incoming outgoing busy
In the above example, softkey 1 is configured for DND for line 1 only, with a “ custom ” configuration. Pressing softkey 1
displays DND screens for which you can customize on the phone.
Priority Alert Settings
Parameter –
dnd key mode
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Sets the mode for how the phone uses “do not disturb” (DND):
• account Sets DND for a specific account.
DND key toggles the account in focus on the IP Phone UI, to ON or OFF.
• phone Sets DND ON for all accounts on the phone.
DND key toggles all accounts on the phone to ON or OFF.
• custom Sets the phone to display custom screens after pressing the DND key, that list
the account(s) on the phone. The user can select a specific account for DND, turn DND
ON for all accounts, or turn DND OFF for all accounts.
Notes:
•
If there is only one account configured on the phone, then the mode setting is ignored
and the phone behaves as if the mode was set to “Phone”.
• You must configure a DND key on the phone to use this feature. To configure a DND key,
see
“Softkey/Programmable Key/Keypad Key/Feature Key/Expansion Module
Key/Hard Key Parameters” on page A-157 .
Format Integer
Default Value 1 (phone)
Range 0 (account)
1 (phone)
2 (custom)
Example dnd key mode: 2
Parameter –
priority alerting enabled
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description Enables and disables distinctive ringing on the IP phone for incoming calls and call-wait-
ing calls.
Format Boolean
Default Value 1 (true)
Range 0 (false)
1 (true)
Example priority alerting enabled: 0