Operational, Basic, and Advanced Parameters
41-001343-02 REV05 – 07.2014
A-127
Message Waiting Indicator Settings
Message Waiting Indicator Request URI Setting
Parameter
–
mwi led line
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Allows you to enable the Message Waiting Indicator (MWI) on a single line or on all lines
on the phone. For example, if you set this parameter to 3, the LED illuminates if a voice-
mail is pending on line 3. If you set this parameter to 0, the LED illuminates if a voicemail
is pending on any line on the phone (lines 1 through 9).
Note:
To enable MWI for all lines in the configuration files, set this parameter to zero (0). The
enable MWI for all lines in the Aastra Web UI, select “All” in the “Message Waiting Indica-
tor Line” field.
Format
Integer
Default Value
0 (all lines)
Range
0 -9
Example
mwi led line: 3
Parameter
–
sip linex mwi request uri
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Description
Specifies the URI to use when specifying which proxy server
Notes:
•
Quotes (“) must be used to enclose the value when specifying it with this parameter.
•
Sip Explicit MWI Subscription must be enabled to use this feature.
Format
“sip:user@host:port”
Default Value
Not Applicable
Range
Not Applicable
Example
sip line1 mwi request uri: “sip:[email protected]”