Operational Features
5-127
41-001343-02 REV05 – 07.2014
Press-and-Hold Speeddial Keypad Keys
The keypad keys on the IP phones can be used to store speeddial numbers that are dialed out when a user presses and
holds the respective key. These press-and-hold speeddial numbers can be configured using the IP phone UI, the Aastra
Web UI, or by defining the “
pnhkeypadN value
” and “
pnhkeypadN line
” parameters in the configuration files.
Configuring Press-and-Hold Speeddial Keypad Keys
You can program one speeddial number for each applicable keypad key (keys 1 through 9). For information on how to
configure the press-and-hold keypad keys using the IP phone UI, please refer to the respective phone model’s
Aastra SIP
IP Phone User Guide
.
Use the following procedures to configure the press-and-hold keypad keys.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Press-and-Hold Speeddial Keypad Key Settings”
Aastra Web UI
1.
Click on
Operation->Keypad Speed Dial.
2.
Select the keypad key you want to program.
3.
In the “
Value
” field, enter the speeddial number.
4.
In the "
Line
" field, select the line number you want the phone to use when dialing the speeddial number.
5.
Click
Save Settings
.