Operational Features
5-53
41-001343-02 REV05 – 07.2014
Locking/Unlocking the SAVE and DELETE keys
By default, the 6730i, 6731i, 6753i, and 6865i have two keys dedicated to the
Save
and
Delete
functions. These two keys
can be made programmable by the Administrator, freeing up the total number of programmable keys if required.
If a System Administrator unlocks the
Save
and
Delete
keys, these keys can be configured with the same functions that
are available for the other programmable keys. Only the System Administrator can unlock these keys.
The
Save
key allows you to save entries to the Directory and perform a Save-To from the Callers List. It also allows you to
save speeddial information to a programmable key. You can also use the
Save
key while using specific XML applications.
The
Delete
key allows you to remove entries from the Directory List and Callers List. (Must enter the Directory or Callers
list and select an entry, then press twice to delete entry).
By default, the
Save
and
Delete
keys are locked so that a user can use them for saving and deleting only. An Administra-
tor can unlock these keys using the configuration files, allowing the keys to be programmed with other functions if
required. An Administrator can use the following parameters in the configuration file to lock and unlock the
Save
and
Delete
keys:
For the 6730i, 6731i, and 6865i:
•
prgkey5 locked
•
prgkey6 locked
For the 6753i:
•
prgkey1 locked
•
prgkey2 locked
The value of "
0
" unlocks the keys, and the value of "
1
" locks the keys. The default is "1" (lock).
The following is an example of unlocking the
Save
and
Delete
keys on the 6753i using the configuration files:
Example:
prgkey1 locked: 0
prgkey2 locked: 0
Once the
Save
and
Delete
keys are unlocked, a User can change the function of the keys using the Aastra Web UI. An
Administrator can change the function of the keys using the Aastra Web UI or the configuration files.
Locking and Unlocking the Save and Delete Keys Using the Configuration Files
Note:
Applicable to the 6730i, 6731i, 6753i, and 6865i IP Phones only.
Notes:
•
If you change the functions of the
Save
and
Delete
keys, and then an Administrator locks the respective keys, the
functions are automatically set back to the default settings of "
Save
" and "
Delete
"
•
The
Save
and
Delete
functions are limited to Key 1 and Key 2 on the 6753i and Keys 5 and 6 on the 6730i, 6731i, and
6865i IP phones only.
Configuration Files
For the specific parameter you can set in the configuration files, see Appendix A, the section,
