manualshive.com logo in svg

Aastra 6730I, Administrator'S Manual

The Aastra 6730I User Manual is your go-to guide for using this advanced phone system. This comprehensive manual provides step-by-step instructions and valuable tips for optimizing your experience with the product. Download it for free from our website and unlock the full potential of your Aastra 6730I.

Share
Download
background image

Global SIP Settings

 

4-69

41-001343-02 REV05 – 07.2014

Advanced SIP Settings (optional)

Advanced SIP Settings on the IP Phone allow you to configure specific features on the phone. The following table pro-
vides a list of Advanced SIP Settings that you can configure using the Aastra Web UI or the configuration files.

8.

In the "

Backup

 

Outbound Proxy Server

" field, enter the backup SIP outbound proxy server IP address or fully qualified domain name.

9.

In the "

Backup

 

Outbound Proxy Port

" field, enter the port on the IP phone that allows SIP messages to be sent to the backup outbound 

proxy server.

10.

In the "

Registrar Server

" field, enter an IP address or fully qualified host name for the SIP registrar server. A global value of 0.0.0.0 disables 

registration. However, the phone is still active and you can dial using username@ip address of the phone.

If the Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e., line 1, line 2, etc.), then the register request is not sent, the "No Service" mes-
sage does not display, and the message waiting indicator (MWI) does not come on.

11.

In the "

Registrar Port

" field, enter the port number associated with the Registrar.

12.

In the "

Backup

 

Registrar Server

" field, enter an IP address or fully qualified host name for the backup registrar server. A global value of 

0.0.0.0 disables registration. However, the phone is still active and you can dial using username@ip address of the phone.

If the Backup Registrar IP address is set to 0.0.0.0 for a per-line basis (i.e., line 1, line 2, etc.), then the register request is not sent, the "No Serv-
ice" message does not display, and the message waiting indicator (MWI) does not come on.

13.

In the "

Backup

 

Registrar Port

" field, enter the port number associated with the backup registrar.

14.

In the "

Registration Period

" field, enter the requested registration period, in seconds, from the registrar.

15.

To enter a value in the “

Conference Server URI

” field, see Chapter 5, the section, 

“Centralized Conferencing (for Sylantro and BroadSoft Serv-

ers)”

 on 

page 5-273

.

16.

Click 

Save Settings

 to save your changes.

Aastra Web UI Parameters

Configuration File Parameters

Explicit MWI Subscription
Explicit MWI Subscription Period

sip explicit mwi subscription
sip explicit mwi subscription period

MWI for BLA Account

sip mwi for bla account (see 

Chapter 5, “Configuring Operational Fea-

tures”

)

Missed Call Summary Subscription (global)
Missed Call Summary Subscription (per-line)
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

Missed Call Summary Subscription Period 
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

sip missed call summary subscription (global)
sip lineN missed call summary subscription (per-line) (see 

Chapter 6, 

“Configuring Advanced Operational Features”

)

sip missed call summary subscription period
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

AS-Feature-Event Subscription (global)
AS-Feature-Event Subscription (per-line)
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

AS-Feature Event Subscription Period (see 

Chapter 6, “Configuring 

Advanced Operational Features”

)

sip as-feature-event subscription (global)
sip lineN as-feature-event subscription (per-line)
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

sip as-feature-event subscription period 
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

Send MAC Address in REGISTER Message 
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

Send Line Number in REGISTER Message
(see 

Chapter 6, “Configuring Advanced Operational Features”

)

sip send mac (see 

Chapter 6, “Configuring Advanced Operational Fea-

tures”

)

sip send line (see 

Chapter 6, “Configuring Advanced Operational Fea-

tures”

)

Session Timer

sip session timer

T1 Timer
T2 Timer

sip T1 timer
sip T2 timer

Transaction Timer

sip transaction timer

Transport Protocol

sip transport protocol

Aastra Web UI

Summary of Contents for 6730I

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6730I

TCL 30Z Quick Start Manual preview
30Z
Brand: TCL Pages: 22
Samsung GALAXY MEGA Manual preview
GALAXY MEGA
Brand: Samsung Pages: 2
Samsung Galaxy MEGA SGH-I527 Manual Del Usuario preview
Galaxy MEGA SGH-I527
Brand: Samsung Pages: 237
Samsung Galaxy j7 Crown Manual preview
Galaxy j7 Crown
Brand: Samsung Pages: 33
Samsung Galaxy J3 Manual preview
Galaxy J3
Brand: Samsung Pages: 39
Samsung Fin Startup Manual preview
Fin
Brand: Samsung Pages: 28
Samsung Exclaim SPH-M550 Manual Del Usuario preview
Exclaim SPH-M550
Brand: Samsung Pages: 226
Samsung E810 Quick Start Manual preview
E810
Brand: Samsung Pages: 12
Samsung E630 - SGH Cell Phone Manual Del Usuario preview
E630 - SGH Cell Phone
Brand: Samsung Pages: 103
Samsung DoubleTime SGH-I857 Manual Del Usuario preview
DoubleTime SGH-I857
Brand: Samsung Pages: 225
Samsung Delve SCH-R800 Series Manual Del Usuario preview
Delve SCH-R800 Series
Brand: Samsung Pages: 180
Samsung Galaxy light Setup Manual preview
Galaxy light
Brand: Samsung Pages: 10
Samsung Galaxy Note 3 Disassembly Manual preview
Galaxy Note 3
Brand: Samsung Pages: 7
Samsung Galaxy Music GT-S6010 Quick Start Manual preview
Galaxy Music GT-S6010
Brand: Samsung Pages: 39
Samsung Byline SCH-R310 Serie Manual Del Usuario preview
Byline SCH-R310 Serie
Brand: Samsung Pages: 119
Samsung E800 Owner'S Manual preview
E800
Brand: Samsung Pages: 100
Samsung galaxy note 5 Get To Know preview
galaxy note 5
Brand: Samsung Pages: 2
Samsung galaxy note 5 Manual preview
galaxy note 5
Brand: Samsung Pages: 148

Brands by name

Popular brands

Load more brands