A
ASTRA
6700
I
SIP T
ERMINALS
FOR
MX-ONE
22
26/1531-ANF 901 14 Uen E10 2014-01-22
softkey5 states: idle
softkey5 line: 1
7.3.2
Log on with procedure
This method can be useful in a home office scenario when the registra-
tion towards MX-ONE is done via a firewall that only allows SIP signaling
but not http signaling.
The procedure to register the telephone is:
•
Enter
*11*PIN*extension number#
. The PIN code must be
entered if the PIN code is initiated in TSE.
•
If the registration is successful, the extension number and the name
of the user is shown in the display.
The procedure to log off the telephone is:
•
Enter
#11#
.
•
If the log off is successful, the display shows
Logged off.
7.3.3
Change of PIN code
The user can change the PIN code by entering the procedure *74*old
PIN*new PIN#.
Note:
If a <mac>.cfg file is used, the PIN code must manually be
changed also in this file.
7.4
Log On/Off Key Not Used
If free seating shall not be used or if the log on/off key must be used to
other features, the MAC configuration file can be used for deploying the
phone number and PIN code in the telephones.
7.4.1
MAC configuration file
There are information in the template file for the mac file stored under
/etc/opt/eri_sn/aastraSIPphones
.
The MAC configuration shall be used for exceptions to the general key
layut choosen for each model. See Chapter “Default key layout” if the
general layout shall be changed.
Alternative1. Use MAC file to only logon via the logon prompt at bootup,
which is set via “sip action uri startup” and not configure any logoff key
.
