Aastra 55I User Manual Download

Page: 64 / 204

Model 55i IP Phone User Guide

Line Keys, Programmable Keys, and Softkeys

State-Based Softkeys

(Bottom Keys only)

On the 55i bottom softkeys, you can configure a specific state to display when a
softkey is being used.

The following table describes the states available to configure for the softkeys.

The following table identifies the applicable default states for each softkey type on
the IP phone.

State

Description

idle

The phone is not being used.

connected

The current line is in an active call (or the call is on hold).

incoming

The phone is ringing.

outgoing

The user is dialing a number, or the far-end is ringing.

busy

The current line is busy because the line is in use or the line is set as
“Do Not Disturb”.

Softkey Type

Default States

None

All states disabled.

Line

idle, connected, incoming, outgoing, busy

Speeddial

idle, connected, incoming, outgoing, busy

DND

idle, connected, incoming, outgoing, busy

BLF

idle, connected, incoming, outgoing, busy

BLF List

idle, connected, incoming, outgoing, busy

Auto Call

Distribution (ACD)

idle

Directed Call

Pickup (DCP)
Group Call

Pickup (GCP)

idle, connected, incoming, outgoing, busy

XML

idle, connected, incoming, outgoing, busy

Softkeys

(state-based)

Summary of Contents for 55I













































































































































































































Search results

Summary of Contents for 55I

Reviews:

Related manuals for 55I

Brands by name

Popular brands

Aastra 55I, User Manual

Search results

Summary of Contents for 55I

Reviews:

Related manuals for 55I

Brands by name

Popular brands