Aastra 55I User Manual Download

Page: 44 / 204

Model 55i IP Phone User Guide

Customizing Your Phone

Time and Date

On the IP phones, you can configure the following:

• Time and date
• Time and date format
• Time zone
• Daylight savings time

• Time Servers (Administrator use only;password protected)

Configuring Time and Date

Use the following procedures to configure the time and date settings on the
IP phone.

Set Time and Time Format

Press

on the phone to enter the Options List.

Select

Preferences.

Select

Time and Date.

Select

Set Time.

Note:

You can set the above features using the IP Phone UI. However, only the

Time and Date Formats can be set using the Aastra Web UI. The "Time
Server" configuration is for Administrator use only and is password pro-
tected. Contact your System Administrator for more information.

IP Phone UI

Note:

The time and time format you configure display on the phone’s idle

screen.

Time and Date

Done -

- Select

1. Time Zone

2. Daylight Savings

3. Time Format

4. Date Format

5. Time Server

6. Set Time

7. Set Date

Summary of Contents for 55I













































































































































































































Search results

Summary of Contents for 55I

Reviews:

Related manuals for 55I

Brands by name

Popular brands

Aastra 55I, User Manual

Search results

Summary of Contents for 55I

Reviews:

Related manuals for 55I

Brands by name

Popular brands