Model 53i IP Phone User Guide 3
Getting Started
Getting Started
The 53i must be set up and configured prior to its first use. This section
describes phone behavior and start up screens you may see when the
phone is first plugged in, or when it is restarted.
Plugging in and Starting the Phone
The 53i automatically begins the start up sequence as soon as it is
connected. The phone goes through this process the first time you plug in
your phone and every time you restart your phone.
The phone displays the following startup screens.
The 53i phone then checks settings and looks for new configuration and
firmware updates for the phone from a server. If a new update is found, the
phone displays the message “
Updating Configuration
”. This may take a
few moments while the phone downloads the latest updates.
Note: New updates to your phone can be automatically scheduled from the server.
This is set up on the phone system by your system administrator and should
be scheduled during non-business hours or slow call periods.
Important! Do not unplug or remove power to the phone while it is checking or
installing firmware and configuration information.
Checking for new
firmware......
Initializing
network
Aastra 53i
Updating
configuration
Summary of Contents for 53I IP PHONE - RELEASE 2.0
Page 1: ...53i IP Phone User Guide Release 2 0 41 001199 00 Rev 01...
Page 4: ......
Page 94: ......
Page 101: ......
