manualshive.com logo in svg

Aastra 470, System Manual, Page: 198 / 250

Share
Download
Aastra 470 System Manual Download Page 198

Operation and Maintenance

198

Aastra 470 as of R1.2

syd-0337/1.2 – R1.2 – 11.2011

6. 4. 3. 2

Status LEDs on the applications server

The applications server has a three-coloured status LED on the On/Off button (On/
Off LED), which indicates the operating state of the applications server, two LEDs 
on the Ethernet interface, and one LED each for the USB ports and the hard disk.

Fig. 81

Status LEDs on the applications server

Tab. 97

Explanation of the status LEDs on the applications card

LED

Signalling

Meaning

On/Off

Steady green

Applications server running fault-free

On/Off

Steady red

Error on the applications server

On/Off

Steady orange

Applications server is switched off

HDD

Flickering green

Hard disk access

USB

Steady red

Power overload on one of the USB interfaces. 
 Note: The maximum permissible current input at the USB interfaces 
varies (see 

Tab. 26, page 54

)

LAN

The Ethernet interface on the applications server is covered as there is currently no provision for its 
use.

USB

HDD

LAN

Summary of Contents for 470



























































































































































































































































Reviews:

No comments