Installation
134
Aastra 470 as of R1.2
syd-0337/1.2 – R1.2 – 11.2011
Note:
DHCP is deactivated only temporarily and is reactivated after a subse-
quent restart.
Cable types
The Ethernet switch on the communications server features Auto MDI/MDIX. With
the automatic detection straight or crossover LAN cables can be used for all con-
nection types.
Configuration
On theAMS Configuration Manager the Ethernet interfaces routed to the front
panel can be configured individually. The following settings are possible:
Tab. 72
Configuration possibilities for Ethernet interfaces
Status LED
The status of the Ethernet interfaces is indicated by the green and yellow LEDs di-
rectly on the interface in question.
Fig. 67
Status LED on the Ethernet interfaces
Tab. 73
Status LED on the Ethernet interfaces
Parameter
Parameter value
Speed/mode
<
Automatic
,
1G/full-duplex
,
100M/full-duplex
,
100M/half-duplex
,
10M/full-duplex
,
10M/half-duplex
>
MDI
<
Auto MDI/MDIX
,
MDI (straight)
,
MDIX (crossed
>
Green LED
Yellow LED
Rate
Status
On
On
10 Mbit/s
Port has a connection with the network
flashing
flashing
10 Mbit/s
Port is receiving or sending data
On
Off
100 Mbit/s
Port has a connection with the network
flashing
Off
100 Mbit/s
Port is receiving or sending data
Off
On
1 Gbit/s
Port has a connection with the network
Off
flashing
1 Gbit/s
Port is receiving or sending data
7!.
,!.
,!.
,!.