Supplementary features
40
Aastra 610d
eud-1290/1.2 – R3.0 – 04.2013
Dialling with configured softkey
You want to call someone whose phone number is stored under a softkey.
You can dial the person by pressing the corresponding softkey. To find out how to
configure a softkey, refer to the chapter
Requesting a callback
You want to talk to a certain person. The person is busy or does not answer. You can
make callback requests to both internal and external users. Not all providers support
this function.
If the called party is busy, you can activate an automatic callback. In this case, your
phone will start ringing as soon as the party you are trying to reach goes on-hook.
Then when you press the Call key, the user is called directly.
If the called party does not answer, you can also request a callback. The user then
obtains a message indicating your callback request on his display.
Press the configured softkey.
➔
The key’s allocated phone number is shown on the display.
Press the Call key.
➔
The phone number displayed is dialled.
You called someone and hear the busy tone or the ring-back tone.
Callback
To activate a callback request:
Press the
Callback
softkey.
➔
Acknowledgement tone sounds, the display shows
Call expected
.
Close
Back to the idle state:
Press the
Close
softkey.
➔
Callback remains activated.
Note:
The callback is stored in
Menu
>
Activated features
as long as it was not
answered or cancelled by the system.
Reset
Reset callback:
Press the
Reset
softkey.
➔
Callback is deactivated.
Note:
You can only have 1callback activated at a time and only 1 callback can be
expected from you. Your callback request will automatically be cancelled by
the system after about half an hour.
