Home
/
Aastra
/
400 Series
/
System Manual

Aastra 400 Series, System Manual, Page: 150 / 592

Share

Page: 150 / 592

Aastra 400 Series System Manual Download Page 150

Routing elements

150

System functions and features as of R3.0

syd-0367/1.3 – R3.0 – 03.2013

5. 7. 3

User Groups for Voice Mail and Other Applications

User group 17 (Aastra 415/430) and user group 25 (Aastra 470) have been designed
to accommodate a voice mail server.

User groups 18 to 21 (Aastra 415/430) or 26 to 29 (Aastra 470) are provided for ap-
plications that require a call forwarding to a user group.

These user groups differ from ordinary user groups in the following way:

• In the case of calls to these user groups, redirections of the UG user are not car-

ried out. However, callers who dial the user in the user group directly are redi-
rected.

• They can be the destination of a Call Forwarding Unconditional or Call Forward-

ing on No Reply, even if the diverting user is still a member of a different user
group. In each case redirections to these user groups due to Call Forwarding will
be carried out only once the call forwarding time has elapsed.

• It is not possible to divert these UG users to the special user groups. This applies

even if the user logs out of the UG beforehand.

• Only the user group element "Member group" is available.

•

Global

call distribution is not available.

• It is possible to configure whether or not calls should generate an entry in the

list of unanswered calls for the corresponding user whenever calls are diverted
to these user groups (see

The following applies in particular for the voice mail user group:

• Up to 16 voice channels (= user-group members) can be implemented for each

user group.

• If the voice mail user groupis not taken up by a voice mail application, it can be

used for other applications.

«
...
148
149
150
151
152
...
»

Summary of Contents for 400 Series

















































































































































































































































































































































































































































































































































































































Reviews:

No comments